HOW TO INSTALL MHUB ID LICENCE ON MACHINES (PC).
HOW TO INSTALL MHUB ID LICENCE ON MACHINES (PC).
(When they are Invalid).
1. When trying open the Mhub Diagnostic Utility or Mhub Diagnostic Utility (BETA) but small screen will appear letting you know that you require a new valid license. As seen below: Kindly do the following as instructed below.
2. Firstly, gather all the info provided and log a ticket with Scope Support team with the following:
3. Indicating the problem being experienced, the “Machine ID:” the number displayed on your pc. Then kindly send it to the information through for assistance, as they will assist on generating the new license file for the Mhub application (Remember to provide the correct Mhub application version that you are running on your machine as an example: Mhub Diag Version 1.46 Beta or Mhub Diag Version 1.41)
4. Once you have received the license file, download it copy it and paste in the following place where it's generally been saved on pc’s: “C:\Program Files (x86) \Scope technology\MHub Diagnostic Utility [BETA]”.
5. Once the license has been pasted in the Mhub should open as normal.
Related Articles
Mhub Diagnostic Utility Manual.
Kindly see attached, Mhub Diagnostic Utility Manual PDF Table of Contents: Introduction ................................................................................................................... 5 1. Getting Started ...MHub 369 - Device information
Online Diagnostic https://mojo.r7d.xyz/MHubDiagnostic.html Files attached in this article Manuals: MHub369 Quick Installation Manual V01 MHub369 Technical V01 Firmware: 2025-01-06_102112_MHub369-6-40-V1R2B-RLS_CANDIDATE_9Scope Mhub Diagnostic Utility Remote Connection.
Scope Mhub Diagnostic Utility Training. Content: 1.1) Opening Mhub Diagnostic Utility application..... 1.2) Device Selection.... 1.3) Remote connection settings.... 1.4) Establish connection to the device..... 1.5) View read the configuration of the ...Driver key configuration and Mhub 369B wiring instruction
Below are the steps to configure your device to use Input 1 has a source of ignition : How to set input 1 as a source of ignition [for Trip start ]: 1.Ensure that you have set the following setting on your device configuration ( you can search for ...Updating device Firmware for the HMub 369B/F
Below is process where you use to update firmware using the "ESP Tool" Step 1: > Log into the URL: https://espressif.github.io/esptool-js/ > Select the baord rate : 115200 >Click Connect Step 2: Select the device on the comport that it is connected ...